Operating instructions

13
1) Alarm Function will only activate on ON mode
2) Slide the FUNCTION switch to ON position.
3) Plug the iPod to the iPod docking station. If the iPod is in PAUSE mode before
plugged in, the iPod will playback itself once plugged into the docking station.
If the iPod is in PLAY mode before plugged in, the iPod will changed into
PAUSE mode once plugged into the docking station. Then press
PLAY/PAUSE button to start music playback.
4) Press PLAY/PAUSE button on top panel or remote control to control play and
pause function.
5) Press the VOLUME + / VOLUME – button on top panel or remote control to
adjust the VOLUME level of this unit as desired.
6) Press BASS + / BASS – on the remote control to adjust the BASS level, it will
enhance/reduce the BASS effect and the display will show the range of b:03 to
b:-3 .
7) Press TREBLE + / TREBLE – on the remote control to adjust the BASS level,
it will enhance/reduce the TREBLE effect and the display will show the range
of t:03 to t:-3
8) When iPod video is plugged into this unit, the video can be viewed from other
display by connecting the VIDEO OUT jack to the desired video display ( video
connection cable is not included).
Remarks: Please make sure the TV Out is set to ON in the iPod

Video
Setting menu. Otherwise the video signal will not be able to show
on the display. (For detail, please check the iPod

Video
Instruction Manuel.)
Control iPod

menu by REMOTE CONTROL only
Press MODE button on the remote control, the iPod

will go to the previous menu.
Press IPOD UP/ IPOD DOWN button on the remote control to select up or down
of the iPod

menu; then press the ENTER button to enter selected menu.
iPod

CHARGING
If the iPod

is connected to the unit, iPod

will charge automatically in any mode.