Ditto Manhattan Deluxe User’s Manual
Frequently Asked Questions Q. When can I start using my stroller? A. You should wait until your child is 6-8 weeks of age before using your stroller. As every child develops differently you may want to consult your pediatrician before using your stroller. Always use proper neck and body support for smaller children. Q. How much weight will my stroller hold? A. Your stroller will hold up to 85 pounds of child weight plus 8 pounds of cargo weight. Q. Is my stroller rust proof? A.
Before Beginning Correct Assembly of this stroller is vital for safe use by you and your passenger. We strongly recommend that you follow these assembly instructions closely. Choosing not to follow these instructions is outside of the manufacturer’s or distributor’s liability. No tools are required for the assembly of your stroller. Included in your stroller box you will have the below listed items. If you are missing any of the listed items please call us @ 1-800-278-9626 and we will gladly help you.
Rear Wheel Installation: A. Remove 16” wheels from plastic bags. B. Remove foam cover from wheel axle. C. Place rear footbrake in upright position. D. Push on the black cap in the center of the wheel, and insert it into the rear stroller frame axle. Give the wheel a tug to make sure it is locked into place. To remove the rear wheels, make sure that the footbrake is in the upright position. Push on the center of the black cap that says push and pull wheel axle out of the stroller frame.
Ditto Manhattan Deluxe Frame Features: Front Swivel Wheel With Stationary Lockout: Your stroller is equipped with a lever that allows your front wheels to swivel or stay in a locked position. This lever is located on the frame, between the seats on the back side. Stationary position: Lift lever and release, then swivel the front wheels to the underside of the footplate until they locks into place. Swivel position: Squeeze the lever toward the frame and psh the spring button in until locked.
Rear Footbrake: Your stroller is equipped with a rear footbrake for child safety. The footbrake is located to the inside of the rear wheels, mounted on the rear axle of the stroller. Setting rear footbrake: Set your footbrake by pushing down with your foot, using light force to engage the brake into the wheel hub. Releasing rear footbrake: Simply place the top of your foot on the underside of the footbrake and lift up with light force.
Seat Features: The seat on your Dreamer Design stroller is equipped with many features for parent and child comfort and convenience. 5 Point Harness: You will want to do a general positioning of the harness before placing your passenger in the seat. Once your passenger is in the seat, you will want to do a final harness adjustment. A. Shoulder Height Adjustment: Push down on the silver center button located between the passenger's knees.
Stroller Storage: Your stroller comes with many convenient parent and child pockets as well as water bottle holders, inside and under the seat pockets. The combined weight limit for these features is 5 pounds. WARNING: Do not overload storage compartments as your stroller may tip if overloaded. Do not store sharp objects in any of the pockets or basket.
Sun Canopy Features & Use: Your stroller is equipped with retractable, fully front rotating sun canopies with many convenient parent and child features. Features include: Retractable front sun visor, view port window and side storage pockets. To rotate the sun canopy forward, simply unvelcro the flap at the back of the sun canopy and rotate it to the desired position. Canopy Removal: Your sun canopies can be removed from the stroller frame.
Maintenance: We recommend that you have an experienced dealer perform these maintenance checks at least once a year. Lubrication of the following items is necessary: Front wheel axle Check fabric seams and straps for fraying and tearing. Keep it out of the sun, and in a dry place when not in Quick release lever use, to prevent fading and mildew. Insert in frame for rear wheels Check the frame for loose rivets, cracks, and wear.
Warranty Registration Please provide the following information and mail it to: Dreamer Design PO Box 369 Selah, WA 98942 Or complete registration online at www.dreamerdesign.
Post Office will not deliver without Postage.
