Manualshelf

User manual

ManualsBrandsDream Vision ManualsProjectorsVunzi
31323334353637383940
10.0 DISPLAY SETUP SETTINGS
34 R699820 - Yunzi Series User Manual
9.8 Environment Setting
To finely tune the picture setting, you may change the environment settings so that they match your installation:
• Screen size: diagonal size in inches set this setting between 60” and 200”.
• Viewing distance is the distance to the screen of the nearest seat in meters, set it between 1m and 10m.
•Wall color, select “Dark” if the walls are black or similar, for any lighter shades select “Light”.
10.0DISPLAY SETUP SETTINGS
Back Color
Configures the screen color displayed when there is no active input. Set to Blue or Black.
Menu Position
Upper left, Upper right, Center, Lower right, Lower left.
Menu Display
15sec: Display menu for 15 seconds before fade out.
On: Always display menu.
Line Display
5sec: Display the input settings for 5 seconds after input selection.
Off: Don’t display.
Source Display
On: Display the source of the input signals after input selection.
Off: Don’t display.
Logo
On: Display D-ILA logo during startup for 5 seconds.
Off: Don’t display.
Language
Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norwegian, Russian and Chinese.
11.0FUNCTION SETTINGS
11.1 Trigger
The 12V trigger output can be used to control any compatible devices such as motorized screens or anamorphic
kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
• Off: 12V trigger voltage state is always low.
• On (Power):12V trigger state is high when the projector is powered ON. To be used with motorized screens.
• On(Anamo): 12V trigger is high only when Anamorphic Mode A or Mode B is engaged. To be used with
motorized anamorphic kits.
11.2 Off-Timer
You can configure this automatic power Off function that will switch off the projector when there is no operation or
after a determined timer. Choose the duration of the timer between: Off, 1 hour, 2 hours, 3 hours and 4 hours.
11.3 High Altitude Mode
Select this when the projector is in a location of low atmospheric pressure. On or Off.