User manual

8.0 INPUT SIGNAL SETTINGS

R699820 - Yunzi Series User Manual 29

8.0 INPUT SIGNAL SETTINGS

8.1 HDMI Inputs

This menu is available if the selected active input is HDMI1 or HDMI2.

Input

•Auto: The input dynamic range is automatically detected and conﬁgured.

• Standard: Force dynamic range to 16-235.

• Enhance: Force dynamic range to 0-255.

• Super White: Force dynamic range to 16-255.

Check Input Levels

The following pattern is overlaid to current picture to conﬁrm that the correct input level has been selected.

Use the Input Levels pattern to conﬁrm the correct HDMI dynamic range setting.

Color Space

•Auto: The source color space is automatically detected and conﬁgured.

• YCbCr(4:4:4): Set color space to YCbCr 4:4:4.

• YCbCr(4:2:2): Set color space to YCbCr 4:2:2.

• RGB: Set color space to RGB 4:4:4.

Control with HDMI (CEC*)

• Off: By default the CEC(*) communications are disabled.

• On: Enables CEC(*) communications to be sent to the projector through HDMI cable.

(*) CEC stands for Consumer Electronic Control

8.2 Component

This menu is available if the selected active input is Component.

•Y Pb/Cb Pr/Cr: Select this option if the COMP. input is connected to a component video signal.

• RGB: Select this option if the COMP. input is used with a RGB video source.

8.3 PC (Yunzi 2 & 3 only)

This menu is available if the selected active input is PC (Sub-D15) input.

•Auto Alignment: Automatically adjusts Tracking, Phase and Picture Position

•Tracking: Adjust the horizontal size and display area of the picture.

• Phase: Adjust ﬂickering and blurred pictures.

• Picture Position: Adjust the display position of the picture.

8.4 Picture Position

Depending on your source, you may ﬁnd that the picture should be adjusted into the screen, adjust the horizontal

and vertical position of the picture into the screen. Some signals may not be fully displayed, adjust this setting

properly when necessary.

8.5 Aspect Ratio

When watching a movie or video program, you can manually set the desired aspect ratio to ﬁll your screen. Select