User manual

5.0 CONNECTIONS
20 R699820 - Yunzi Series User Manual
5.3 Connecting an Automation or Control device
Connection Device
RS-232C Automation Device, Control Device or Computer with RS-232 capability.
Optional IR-receiver
Can be used to connect an external IR receiver when this unit is used in a
dedicated box or in rear projection setup.
12V Trigger
DC power supply output 12V@140-300mA to control either a screen or an
anamorphic slider.
LAN Automation Device, Control Device or Computer with RJ-45.
(*) USING RS-232 WITH A COMPUTER
The RS-232 Control and Automation may require specific software and tools. See “RS-232C protocol”, page 40 for
more details on RS-232 cabling and protocol.
(*) USING LAN WITH A COMPUTER
When the LAN Control is selected, the RS-232 port cannot be used for automation. In addition, the control device
must send specific functions to this unit using the Local Network (this is not a web interface) See “LAN protocol”,
page 46 for more details on the network configuration and protocol.
CONNECTING AN AUTOMATION/CONTROL DEVICE
This unit can control or be controlled by using several input/output terminals. Each terminal is ruled by specific
protocols. Please refer to Appendix for more information.
LAN * to Rooter
Optional IR-receiver
12V Trigger
RS-232C *
for Automation
for Automation