User manual

2.0 INSTALLATION GUIDELINES
10 R699820 - Yunzi Series User Manual
general, the recommended distance is three times the height of the screen to obtain the best 3D effects.
Best seat position for 3D projection
2.6 Environment of Use
Do not use this unit in rooms with cigarette smoke or oily smoke. This may cause the unit to malfunction. Check
temperature during install. If there is a heater, the air may reach a higher temperature than expected.
Precautions of Usage
This unit makes use of a light source lamp that reaches a high temperature during projection. Do not allow
projection under the following conditions:
• Projection with the unit laid on sides.
• Projection at a location that blocks the air inlets or exhaust vents.
• Projection at a place exposed to air blasts from an air conditioner.
Allowed Inclination during operation
Due to the lamp position and operating angle, this unit cannot operate with more than 5° angle horizontally and 15°
angle vertically. This unit cannot be operated on the side
2.7 Air-Flow and Space Requirements
This unit can be installed in table, ceiling, rear table or rear ceiling position. Make sure that the unit is installed within
the space requirements described below (A: air inlets, B: air outlets).
H = Screen Height
Seat distance formula = 3 x H
(16:9 movies = 3 x H = 1.69 x B)
(2.37:1 movies = 3 x H = 1.26 x B)
5°
15°