EuroBase Bracket Instructions B

A. Headboard
Bracket (2 pcs)
B. Leg (2 pcs)
Headboard Brackets
Contains Two (2) Brackets and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the carton. Arrange on a at
surface and verify you have all of the following parts and hardware.
PART LIST
HARDWARE LIST
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
E. Washer
(8 pcs)
F. Hex Key
(1 pc)
G. Wrench
(1 pc)
D. Nut
(4 pcs)
C. Screw
(4 pcs)
At the headboard side of the bed replace the legs
that came with your frame with two double legs
(Part B), using two screws (Part C), two washers
(Part E) and two nuts (Part D) per leg. Tighten
using hex key (Part F) and wrench (Part G).
At your desired location attach the headboard
brackets
(Part A) to the legs using two screws
(Part C), four washers (Part E) and two nuts
(Part D) per bracket. Ensure the lip of the
bracket is facing outside. Tighten using hex
key (Part F) and wrench (Part G).
E
C
D
E
B
http://www.youtube.com/watch?v=8gAW6dYV1_I
Scan the QR code on your smart phone
or device, or enter the link below to watch
a complete video of the easy installation
of the Headboard/Footboard Brackets.