Bottles 1
EN Read and save these instructions for future use. BEFORE FIRST USE Use clean hands and clean surfaces when handling. Disassemble and clean the product and then place the components in boiling water for five minutes. This is to ensure hygiene. Wash all parts prior to use. Be sure the nipple/teat hole is clean. BEFORE EACH USE Pull on the nipple/teat in all directions before each use to ensure it does not tear.
• Change nipples/teats after approximately six weeks of use. • When used and sterilized intensively, nipples/teats may deteriorate after six weeks. • Do not allow a child to walk or run while using any bottle. CAUTIONS Stop feeding before your baby has completely emptied the nipple/teat to keep your baby from swallowing air that may cause colic or other digestive problems. Be sure to contact your physician should you have any feeding problems or questions. GLASS WARNING Glass bottles may break.
BOTTLE COMPONENTS 1 Cover/Cap 2 Nipple/Teat Collar 3 Nipple/Teat 4 Travel Disk 5 Insert 6 Reservoir Tube 7 Vent Assembly: Press firmly together to prevent leakage Options+ can be used without the vent – simply remove the vent assembly. ©2021 Handi-Craft Company. All Rights Reserved.
