User`s guide

VigorTalk ATA24 Series User’s Guide
32
adapter) or not. If not, the connection of WAN interface will
be regarded as breaking down. This function is available
when Detect Type is set with Send PING or Send Http
Request.
Apply Click Apply to go back to the WAN Interface Configuration
page. To apply all settings, click Apply on the WAN Interface
Configuration page and reboot your adapter.
Reset Click this button to clear all the configurations for this page.
3
3
.
.
2
2
.
.
2
2
M
M
G
G
N
N
In the Network group, select MGN option. The following page for LAN IP/DHCP will be
shown.
IP Address Type the IP address for LAN/DHCP.
Subnet Mask Type the subnet mask for the LAN IP/DHCP.
Status Click Enable the DHCP server; click Disable to close DHCP
server.
Start IP Sets the starting IP address of the IP address pool for DHCP
server.
End IP Sets the ending IP address of the IP address pool for DHCP
server.
Primary DNS Sets the private IP address of the primary DNS.