User`s guide

VigorTalk ATA24 Series User’s Guide
31
D
D
H
H
C
C
P
P
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
If the WAN interface is set as a DHCP client, the VigorTalk ATA-24 will ask for IP network
settings from the DHCP server or DSL modem automatically. It is not necessary for users to
manually configure the adapter.
MTU It means the maximum transmission unit. Default value is 1500.
Change it if you want.
Host Name Some ISP may ask you to type your host name. Please type in if
necessary.
Domain Name Some ISP may ask you to type your domain name. Please type
in if necessary.
Detect Type Select a detecting type for this WAN interface. There are three
ways Send ARP to Gateway, Send PING and Send HTTP
Request supported in the adapter.
Detect Interval (sec) Assign an interval period of time for each detecting. The
minimum value is 3 and no limit for maximum value.
No-Reply Count Assign detecting times to ensure the connection of the WAN.
After passing the times you set in this field and no reply
received by the adapter, the connection of WAN interface will
be regarded as breaking down.
Detect Destination Host
(IP or Domain Name)
Assign an IP address or Domain name as a destination to be
detected whether the host is active (sending reply to the