User`s guide

VigorTalk ATA24 Series User’s Guide
30
No-Reply Count Assign detecting times to ensure the connection of the WAN.
After passing the times you set in this field and no reply
received by the adapter, the connection of WAN interface will
be regarded as breaking down.
Detect Destination Host
(IP or Domain Name)
Assign an IP address or Domain name as a destination to be
detected whether the host is active (sending reply to the
adapter) or not. If not, the connection of WAN interface will
be regarded as breaking down. This function is available
when Detect Type is set with Send PING or Send Http
Request.
IP Alias List Sets other IP addresses binding in this interface. You can set up
to 32 sets of IP alias settings. If you have typed addresses here,
you can see and choose it in later web page settings.
Apply Click Apply to go back to the WAN Interface Configuration
page. To apply all settings, click Apply on the WAN Interface
Configuration page and reboot your adapter.
Reset Click this button to clear all the configurations for this page.