User`s guide

VigorTalk ATA24 Series User’s Guide
20
3
3
.
.
1
1
.
.
4
4
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
This page allows you to determine which services (HTTP/Telnet/SSH) is used for the user to
access VigorTalk ATA-24. In addition, you can also limit some hosts to access VigorTalk
ATA-24 with specified IP address.
In the System group, click the Access Control option. You will get the following page:
Management Method There are three management methods provided here for you to
choose for your adapter. Check HTTP/Telnet/SSH for the
adapter.
Allow Management from
the WAN
Disable - Disable the management from the WAN interface.
Enable All - Enable all management (through
HTTP/Telnet/SSH) from the WAN interface.
Enable User Defined WAN IP - System can be managed by
these three IP addresses via WAN.
Allowed IP1(to 3) - Type in ranges for IP addresses (up to three)
for managing the system.
Management Port Default Ports - Use the default ports for HTTP and Telnet if
you choose HTTP and Telnet as management methods.
User Defined Ports - Or you can assign new port numbers for
HTTP, Telnet and SSH respectively.
PING Restriction Disable PING from the LAN -Choose this function to reject
all ICMP packets from LAN side.