User`s guide

VigorTalk ATA24 Series User’s Guide
19
3
3
.
.
1
1
.
.
3
3
S
S
y
y
s
s
l
l
o
o
g
g
The VigorTalk ATA-24 supports a Syslog function to keep a record of abnormal conditions.
The adapter will send Syslog packets to a Syslog server on the remote site. The administrator
can observe any abnormal events from VigorTalk ATA-24. In the System group, click the
Syslog option. The Syslog web page is shown below:
Status Click Enable to activate this function. The adapter will send system
log message for your reference. If you click Disable, the adapter will
not send out any message about system log.
Syslog Server IP The IP address of the Syslog server. If a user assigns an IP address
of “0.0.0.0”, the Syslog function will be disabled. Then, VigorTalk
ATA-24 will not send Syslog packets to the Syslog server.
Syslog Server Port Assign a port for the Syslog protocol.
Apply Click Apply to save these settings.