User`s guide

VigorTalk ATA24 Series User’s Guide
18
Disconnect Disconnects current connection.
3
3
.
.
1
1
.
.
2
2
T
T
i
i
m
m
e
e
As an NTP (Network Time Protocol) client, the adapter gets standard time from the time
server. Some time-based functions, such as Call Schedule and URL Content filtering, cannot
work properly until the system time functions run successfully. Typically, NTP achieves high
accuracy and reliability with multiple redundant servers and diverse network paths.
The VigorTalk ATA-24 supports synchronization with a specific NTP server or the remote PC
host of the administrator. In the System group, click the Time option. The Time page is
shown below:
Use Browser Time Click this option to use the browser time from the remote
administrator PC host as adapter’s system time.
Use NTP Time Click this option to use the time from an NTP server as adapter’s
system time.
NTP Server Assign a public IP address or domain name of the NTP server.
Time Zone Select the time zone where the VigorTalk ATA-24 is located.
Daylight Savings Time Select Use to activate this function. This function is useful for some
areas.
Update Interval Select a time interval for updating from the NTP server.
Apply Click Apply to save these settings.