User`s guide

VigorTalk ATA24 Series User’s Guide
12
LAN – LAN IP/DHCP Page
IP Address Assign an IP address for the LAN interface.
Subnet Mask Assign the subnet mask for the LAN interface.
Status Click Enable to use DHCP server; click Disable to close
DHCP server.
Start IP Assign the start IP address of the IP pool that DHCP server can
use for clients in LAN.
End IP Assign the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
Primary DNS Type the IP address for primary DNS.
Secondary DNS Type the IP address for secondary DNS.
Lease Time Type the number for lease time. The default setting is 1440.
Gateway IP Type the IP address as DHCP client.
When you finished the above required settings, please click Finish. A system reboot page will
appear. Click Apply to activate the static mode configuration.