User`s guide

VigorTalk ATA24 Series User’s Guide
112
A
A
.
.
7
7
.
.
7
7
S
S
t
t
a
a
t
t
i
i
s
s
t
t
i
i
c
c
s
s
C
C
o
o
m
m
m
m
a
a
n
n
d
d
s
s
- Help in the Statistics function
ATA24/voip/Statistics > ?
- Display call statistics setting
ATA24/voip/statistics> callstat
- Display the setting by port
ATA24/voip/statistics> callstat <Port>
- Edit the range for callstat port
ATA24/voip/statistics> callstat <Port>
<Range>
- Display RTP statistics setting
ATA24/voip/statistics> rtpstat
- Display the setting by port
ATA24/voip/statistics> rtpstat <Port>
- Edit the range for rtpstat port
ATA24/voip/statistics> rtpstat <Port> <Range>
- Display RTP threshold setting
ATA24/voip/statistics> rtpthreshold -s
- Edit the value for rtpthreshold
ATA24/voip/statistics> rtpthreshold <mode> <delayLow> <delayHigh>
<jitterLow> <jitterHigh> <lostLow> <lostHigi> <timeout>
- Display VoIP RTP alert setting
ATA24/voip/statistics> showalert
- Display the setting by port
ATA24/voip/statistics> showalert <Port>
<Port>
Port number of the device.
From 1 to 24
<Range>
for VoIP call statistics
0: 15 minutes
1: 24 hour
<delayLow>
<delayHigh>
<jitterLow>
<jitterHigh>
<lostLow>
<lostHigh>
<timeout>
Round Trip Delay Low Threshold (ms)
Round Trip Delay High Threshold (ms)
Jitter Low Threshold (ms)
Jitter High Threshold (ms)
Packet Loss Ratio Low Threshold (0..100%)
Packet Loss Ratio High Threshold (0..100%)
RTCP timeout (in seconds)
<Lowfreq>
Assign a low frequency number in Hertz unit.
(unit is HZ) (Default is 350)
<Highfreq>
Assign a high frequency number in Hertz unit.
(unit is HZ) (Default is 440)
<Ton1>
The duration of the first ringing.
(10msec per unit) (Default is 0)
<Toff1>
The silence duration after the first ringing.
(10msec per unit) (Default is 0)
<Ton2>
The duration of the next continuous ringing.
(10msec per unit) (Default is 0)
<Toff2>
The silence duration after the next continuous
ringing.