User`s guide

VigorTalk ATA24 Series User’s Guide
111
1: Enable (It means that each SIP protocol packet
will be sent to SIP proxy server always.)
< ProxyName >
Assign a name of SIP proxy server. (Default is
none)
< ProxyIP >
Assign an IP address of SIP proxy server. (Default
is 0)
< ProxyPort >
Assign a port number of SIP proxy server.
1…65535 (Default is 5060)
< RegistrarIP >
Assign an IP address or domain name of SIP
register server. (Default is 0)
< RegistrarPort >
Assign a port number of SIP register server.
1…65535 (Default is 5060)
< Expires >
Assign a timeout value for SIP protocol, the
default value is 300.
(minimum 60 seconds)
<Domain>
Assign an IP address or domain name of SIP
Domain/Realm. (Default is 0)
<Mode>
for SIP Message
0: Output last 50 lines
1: Output last N lines
<Line>
for SIP Message
Print last N lines for mode 1
<UserName>
SIP username
<Password>
SIP password
<DisplayName>
SIP display name
<AuthId>
SIP authentication ID
<CallForwardMode>
0: Disable
1: Call forwarding all calls
2: Call forwarding busy
3: Call forwarding no answer
<CallForwardUrl>
SIP url format, ex: [e-mail]
<CallForwardRing>
1~10 (rings)
<Proxy>
0: Don’t use proxy server
1: use Proxy 1
2: use Proxy 2
3: use Proxy 3
<CallNoRegister>
0: Call with Registration
1: Call without Registration
<RingType>
0: Rings all ports in the group
1: Rings the first available port
2: Rings by round robin
<IpBind>
0: WAN
1: VPN/LAN1
2: VPN/LAN2
3: VPN/LAN3
4: VPN/LAN4
<RingPort>
1~24 port
<Index>
for speed dial setting
1~150
<Number>
Assign a dialing phone number.Ex: 101
<Destination>
Assign an address of dialing destination. Ex:
[e-mail]