User`s guide

VigorTalk ATA24 Series User’s Guide
109
ATA24/voip/sip> sipua -e
ATA24/voip/sip>dialplan -D
- Display speed dial setting
ATA24/voip/sip> speeddial –s
ATA24/voip/sip> speeddial -s <start> <end>
- Add speed dial number and destination for the entry
ATA24/voip/sip> speeddial –a <Number> <Destination> <Memo>
- Edit speed dial number, destination and memo for the entry
ATA24/voip/sip> speeddial –e <Index> <Number> <Destination>
<Memo>
- Delete the entry of speed dial
ATA24/voip/sip> speeddial –d <Index>
- Delete all entries of speed dial
ATA24/voip/sip> speeddial –D
- Display ports that unlocked
ATA24/voip/sip> unlock –s
ATA24/voip/sip> unlock –s <Port>
- Execute port unlock
ATA24/voip/sip> unlock <Port>
<Index>
1 to 30
1 to 32 for SIP user agent
<Name>
Name of the incoming calls
<IP/Domain>
IP address or domain name
<Class>
0 : Allow all incoming calls
1 : Allow only calls from allow list
2 : Allow only calls from speed dial entries
3 : Deny only calls from deny list
4 : Deny all incoming calls
<MatchName>
0 : Disable ; 1 : Enable
<MatchIP>
0 : Disable ; 1 : Enable
<SpeeddialFrom>
1 to 150
<SpeeddialTo>
1 to 150
<Port> <
Port number of the device.
From 1 to 24
<Mode>
for ring port setting/RTP threshold
setting
0 : Disable ; 1 : Enable
<PreferCodec>
Select one Codec to be applied on this port. IVD
supports five Codecs.
0: G.711U(PCMU) -64kbps
1: G.711A(PCMA) -64kbps
2: G.729A -8kbps (Default is 2)
3: G.723.1 -6.3kbps
4: G.726-32kbps
<CodecRate>
Select one rate value to be applied on this port.
20/40 - for PCMU or PCMA (Default is 20)
20/40/60/80 - for G.729A (Default is 20)
30/60 - for G.723.1 (Default is 30)
20/40 - for G.726 (Default is 20)
<VAD>
“Enable” to activate VAD(Voice Activity