User`s guide

VigorTalk ATA24 Series User’s Guide
106
<interDigitMin>
Minimum pulse inter digit time (ms)
<Freqnency>
Ring frequency
20: 20 HZ (default)
25: 25 HZ
<Index>
Pattern Index, Index Value: 1-8
<Ton1>
<Toff1>
<Ton2>
<Toff2>
<Ton3>
<Toff3>
<Ton4>
<Toff4>
Ton1 of cadence, unit: (ms)
Toff1 of cadence, unit: (ms)
Ton2 of cadence, unit: (ms)
Toff2 of cadence, unit: (ms)
Ton3 of cadence, unit: (ms)
Toff3 of cadence, unit: (ms)
Ton4 of cadence, unit: (ms)
Toff4 of cadence, unit: (ms)
<Port number>
1 to 65535
<Mode>
0: Disable
1: Enable
<Port>
T.38 Starting Port, 1 to 65535 (default:13456)
<Redundancy>
T.38 Redundancy Number, 0 to 4 (default:1)
<port>
device port number
<VBD>
0: Auto Detection
1: Modem
2: Fax
Note: “Auto Discovery NAT IP Address” option is used when IVD is behind a
NAT adapter, NAT uses dynamic WAN IP address like as DHCP client. There
must be having a STUN server in Internet. IVD needs to negotiate with STUN
server for this function.
Note: The “STUN”(Simple Traversal of UDP through NATs) server is an
implementation of the STUN protocol that enables STUN functionality in
SIP-based systems. STUN is an application-layer protocol that can determine the
public IP and nature of a NAT device that sits between the STUN client and
STUN server.
A
A
.
.
7
7
.
.
6
6
S
S
I
I
P
P
C
C
o
o
m
m
m
m
a
a
n
n
d
d
s
s
- Help in the sip configuration function
ATA24/voip/sip> ?
- Enter incallbarring configuration function
ATA24/voip/sip> incallbarring
- Display allow list of incoming calls (for SIP)
ATA24/voip/misc> allow –s
ATA24/voip/misc>allow -s <Index>
- Edit allow list of incoming calls (for SIP)
ATA24/voip/sip> allow -e <Index> <Name> <IP/Domain>
- Delete allow list of incoming calls (for SIP)
ATA24/voip/sip> allow -d <Index>
ATA24/voip/sip> allow –d
- Display deny list of incoming calls (for SIP)