User`s guide

VigorTalk ATA24 Series User’s Guide
105
- Display Voice Band Data (VBD) Configuration
ATA24/voip/misc> vbd -s
- Set Voice Band Data (VBD) (same value for each line)
ATA24/voip/misc> vbd <VBD>
- Set Voice Band Data (VBD)
ATA24/voip/misc> vbd <port><VBD>
<value>
Range: 1~60 (second)
<enable>
0: disable
1: enable
<tailLength>
Network Echo Canceller Tail Length (ms)
Range: 8 ~ 128, should be multiple of 8
<Mode>
0: disable
1: enable
<Device port>
Device port number
<Speaker Gain>
Assign the gain value while receiving voice,
default value is 0.
The range is from -14 to 6.
<Microphone Gain>
Assign the gain value while transmitting voice,
default value is 0.
The range is from -14 to 6. (Default is 0)
<line>
Device line number (from 1 to 24)
<Country>
0: 600 Ohm (default)
1: 900 Ohm
2: China
<Codec>
0: Mu-LAW (default)
1: A-LAW
<Reversal as Callee off-hook>
0: Disable (default)
1: Enable
<Reversal as Callee on-hook>
0: Disable (default)
1: Enable
<Disable Mode>
0 : Disable NAT traversal (DEFAULT)
<Manual Mode>
1 : Manually input NAT IP address
<Auto Mode>
2 : Auto discover NAT IP address
<NatIpAddr>
Type IP address for manual mode.
<Type>
0 : Semi-auto, need to configure NAT
1 : Full-auto, no need to configure NAT
<LocalPort>
Local listening port number for STUN client
<ServerIP>
The IP address of STUN server
<ServerPort>
The port number of STUN server
<sym_rtp_t38>
0 : Disable symmetric RTP and T.38
1 : Enable symmetric RTP and T.38
<Current>
8: 8 mA (default)
10: 10 mA
12: 12 mA
15: 15 mA
<breakMin>
Minimum pulse break time (ms)
<breakMax>
Maximum pulse break time (ms)
<flashMin>
Minimum flash break time (ms)
<flashMax>
Maximum flash break time (ms)
<makeMin>
Minimum pulse make time (ms)
<makeMax>
Maximum pulse make time (ms)