User`s guide

VigorTalk ATA24 Series User’s Guide
102
- Display the MGCP heartbeat setting
ATA24/voip/mgcp> heartbeat -s
- Edit the dual_homing action
ATA24/voip/mgcp> heartbeat <Active>
- Edit the period of heartbeat for dual_homing
ATA24/voip/mgcp> heartbeat –t <Sec>
- Edit the retry times of dual_homing
ATA24/voip/mgcp> heartbeat –r <Times>
- Display local port setting
ATA24/voip/mgcp> localport -s
- Edit the local port number for MGCP protocol
ATA24/voip/mgcp> localport <Port>
- Display the port lock setting
ATA24/voip/mgcp> portlock –s
ATA24/voip/mgcp> portlock –s <Port>
- Edit the port lock/unlock
ATA24/voip/mgcp> portlock <Port> <lock>
- Display the setting
ATA24/voip/mgcp> rsip -s
- Set the RSIP action
ATA24/voip/mgcp> rsip <Active>
- Display the setting pf sending RSIP with wildcarded endpoint ID
ATA24/voip/mgcp> rsip -s
- Edit the RSIP action
ATA24/voip/mgcp> wildrsip <wildcard> <range>
<IPAddress>
Assign an IP address of Call Agent server in
MGCP (Default is 192.168.100.100)
<Port>
Assign a UDP port number to Call Agent server.
1 to 65535 (Default is 2727)
<Mode>
There are four options for users to select. (Default
is 0)
0. aaln/#@[ip_addr]
ex: aaln/1@[1.1.1.1]
1. mac_addr/#@[ip_addr]
ex: 000504030201/1@[1.1.1.1]
2. aaln/#@mac_addr
ex: aaln/1@000504030201
3. aaln/#@domain_name
ex: aaln/[e-mail]
<LogicID>
Starting number for logic ID.
<DomainName>
Name of the domain
<Active>
0: Disable 1: Enable (default=0)
There are two options for users to select.
Each endpoint sends its own RSIP
Send only one wild-carded RSIP
“Enable” to activate this function.
“Disable” to close this function. (Default is