Operation Manual

VigorSwitch P2121User’s Guide
162
V
V
I
I
I
I
-
-
1
1
T
T
R
R
-
-
0
0
6
6
9
9
This device supports TR-069 standard. It is very convenient for an administrator to manage a
TR-069 device (e.g., such switch) through an Auto Configuration Server
, e.g., VigorACS.
Available settings are explained as follows:
Item Description
ACS Settings TR-069 - Click Enable to activate the settings on this page.
URL/Username/Password – Such data must be typed
according to the ACS (Auto Configuration Server) you want to
link. Please refer to Auto Configuration Server user’s manual
for detailed information.
Wizard – Click it to enter the IP address of VigorACS server,
port number and the handler.
Last Inform – Display the time that VigorACS server made a
response while receiving Inform message from switch last
time.
Test Inform –Click Test With Inform to send a message based
on the event code selection to test if such switch is able to
communicate with VigorACS SI server.
CPE Settings The field lists the authentication information coming from
VigorACS server.
CPE Client – Specify a protocol (HTTP/HTTPS)for
authentication.
Port – Sometimes, port conflict might be occurred. To solve
such problem, you might change port number for switch. The
default number is 8069.
Username / Password – Type the username and password that
VigorACS can use to access into such switch.
Periodic Inform Settings Periodic Inform Settings – The default setting is Disable. If
enabled, please set interval time or schedule time for the
Vigor switch to send notification to CPE. Or click Disable to
close the mechanism of notification.
Interval Time – Enter a value.