Operation Manual

VigorSwitch P1280 User’s Guide
74
V
V
-
-
1
1
P
P
r
r
o
o
p
p
e
e
r
r
t
t
i
i
e
e
s
s
This page allows a user to configure general settings for PoE and configure priority of each
port for supplying PoE power. While maximum power budget is reached, power will be served
starting with critical priority.
If the priority setting for all GE ports is configured as the same value (e.g., High); then, GE1
will have the highest priority to obtain PoE power in actual operation.
Available settings are explained as follows:
Item Description
PoE Mode Disable – Disable the PoE function.
Auto – Provides plug and play PoE function. PoE schedule and
Power Limit are disabled in this mode.
Manual – Before using PoE>>Schedule, set Manual as PoE
mode.
Ports Use the drop down list to select the port (GE1 to GE28) or
ports for applying PoE configuration.
Enable Enable – Make the selected ports be applied with PoE mode.
Disable – Make the selected ports be not applied with PoE
mode.
Priority Select Priority for PoE device.
Low –Set PoE device to low priority connection.
High –Set PoE device to high priority connection.
Critical - Set PoE device to highest priority connection.
Power Limit This setting is available when Manual is selected as PoE Mode.
Enter the value as the maximum limit of power given to each
physical port.
Apply Save the settings or changes to the switch.