Operation Manual

VigorSwitch P1100 User’s Guide
80
Telnet
Telnet is the TCP/IP standard protocol for remote
terminal service. TELNET allows a user at one site to
interact with a remote timesharing system at another site
as if the user’s keyboard and display connected directly to
the remote machine.
Check Enable to access telnet service or uncheck not to
access telnet service.
HTTP
HTTP is the acronym of HyperText Transfer Protocol.
Check Enable to Enable HTTP service.
HTTPS
HTTPS is the acronym of Hypertext Transfer Protocol
over Secure Socket Layer.
Check Enable to Enable HTTPS service.
SNMP
Manage switch through SNMP.
Check Enable to Enable SNMP service.
Apply
Save the settings or changes to the switch.
3
3
.
.
6
6
.
.
2
2
P
P
r
r
o
o
t
t
e
e
c
c
t
t
e
e
d
d
P
P
o
o
r
r
t
t
Function name:
Security>>Protected Port
Function description:
This page allows user to configure protected port setting to prevent the selected ports from
communicate with each other.
Parameter description:
Port List
Select the port to be protected.
State
Configure port protect type:
 Unprotected: Unprotected port can communicate with
all ports.
 Protected: Prevent protected ports from communicate
with each other.
Check
to select port profile.