Operation Manual

VigorSwitch P1100 User’s Guide
73
3
3
.
.
4
4
.
.
8
8
.
.
2
2
P
P
o
o
r
r
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Function name:
Switching>>Spanning Tree>>Port Setting
Function description:
Configure and display STP port settings.
Parameter description:
Check
to select a profile for querier.
Edit
Check
of a profile and click Edit to modify settings.
Protocol Migration Check
Restart the Spanning Tree Protocol (STP) migration
process (re-negotiate with its neighborhood) on the
specific interface.
Port
Specify the interface ID or the list of interface IDs.
State
The operational state on the specified port.
Path Cost
STP path cost on the specified port.
Priority
STP priority on the specified port.
Operation Edge
The operational edge port on the specified port.
Operational
Point-to-Point
The operational edge point-to-point status on the
specified port.
Port Role
The current port role on the specified port. The possible
values are: “Disabled”, “Root”, “Designated”,
“Alternative”, and “Backup”.
Port State
The current port state on the specified port. The possible
values are:
“Disabled”, “Discarding”, “Learning”, and “Forwarding”.
Designated Bridge
The bridge ID of the designated bridge.
Designated Port ID
The designated port ID on the switch.
Designated Cost
The path cost of the designated port on the switch.
The following shows the modification page of port setting for spanning tree.