Operation Manual

VigorSwitch P1100 User’s Guide
72
the range: 1~65,535.
BPDU Handling
Specify the BPDU forward method when the STP is
disabled.
Filtering: Filter the BPDU when STP is disabled.
Flooding: Flood the BPDU when STP is disabled.
Priority
Specify the bridge priority. The valid range is from 0 to
61440, and the value should be the multiple of 4096. It
ensures the probability that the switch is selected as the
root bridge, and the lower value has the higher priority
for the switch to be selected as the root bridge of the
topology.
Hello Time
Specify the STP hello time in second to broadcast its
hello message to other bridge by Designated Ports. Its
valid range is from 1 to 10 seconds.
Max Age
Specify the time interval in seconds for a switch to wait
the configuration messages, without attempting to
redefine its own configuration.
Forward Delay
Specify the STP forward delay time, which is the amount
of time that a port remains in the Listening and Learning
states before it enters the Forwarding state. Its valid range
is from 4 to 10 seconds.
Tx Hold Count
Specify the tx-hold-count used to limit the maximum
numbers of packets transmission per second. The valid
range is from 1 to 10.
Operational Status
Bridge Identifier
Bridge identifier of the switch.
Designated Root
Identifier
Bridge identifier of the designated root bridge.
Root Port
Operational root port of the switch.
Root Path Cost
Operational root path cost.
Topology Change Count
Numbers of the topology changes.
Last Topology Change
The last time for the topology change.
Apply
Save the settings or changes to the switch.