Operation Manual

VigorSwitch P1100 User’s Guide
66
IGMPv3: Support v3 basic and v2.
Report Suppression
Check Enable to set the enabling status of IGMP v2
report suppression.
Apply
Save the settings or changes to the switch.
VLAN Setting Table
VLAN ID
The IGMP entry VLAN ID.
Operation Status
The enable status of IGMP VLAN functionality.
 Enabled: when IGMP Snooping enable and IGMP
VLAN enable and multicast filtering enable.
 Disabled: when IGMP Snooping disable or IGMP
VLAN disable or multicast filtering disable.
Router Port Auto Learn
Set the enabling status of IGMP router port learning.
 Enable: Enable learning router port by query and
PIM, DVRMP.
 Disable: Disable learning dynamic router port.
Query Robustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet.
Query Interval
The interval of queries send general query.
Query Max Response
Interval
In Membership Query Messages, it specifies the
maximum allowed time before sending a responding
report in units of 1/10 second.
Last Member Query
count
The count that Query-switch sends Group-Specific
Queries when it receives a Leave Group message for a
group.
Last Member Query
Interval
The interval that Query-switch sends Group-Specific
Queries when it receives a Leave Group message for a
group.
Immediate leave
Leave the group when receive IGMP Leave message.
 Enable: Enable Fastleave.
 Disable: Disable Fastleave.
Edit
Click Edit to edit the IGMP Snooping Table.
Check
to select VLAN profile for IGMP.
Edit
Check
of a VLAN profile and click Edit to modify
settings.
The following shows the modification page of IGMP Snooping VLAN port setting.