Operation Manual

VigorSwitch P1100 User’s Guide
59
Parameter description:
Check
to enable the selected VLAN port entry.
Edit
Check
for one entry and click Edit to modify VLAN
port.
Port
Display the interface.
Mode
Display the VLAN mode of port.
PVID
Display the Port-based VLAN ID of port.
Accept Frame Type
Display accepted frame type of port.
Ingress Filtering
Display ingress filter status of port.
The following shows the modification page of VLAN port setting.
Parameter description:
Port
Display the interface of the port entry.
Mode
Select the VLAN mode of the interface.
Hybrid: Support all functions as defined in IEEE
802.1Qspecification.
Access: Accepts only untagged frames and join an
untagged VLAN.
Trunk: An untagged member of one VLAN at most, and
is a tagged member of zero or more VLANs.
PVID
Specify the port-based VLAN ID (1~4094). It’s only
available with hybrid and Trunk mode.
Accept Frame Type
Specify the acceptable-frame-type of the specified
interfaces.
It’s only available with Hybrid mode.
Ingress Filtering
Specify the status of ingress filtering.
It’s only available with Hybrid mode.