Operation Manual

VigorSwitch P1100 User’s Guide
53
3
3
.
.
4
4
.
.
5
5
.
.
2
2
P
P
o
o
E
E
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Function name:
Switching>>PoE>>PoE Setting
Function description:
This page allows user to configure PoE working type and per port status.
Parameter description:
PoE Mode
Static (Priority Power Base) – The PoE Static mode is
manual configure per port on/off, power budget and PD
priority.
Dynamic (NonPriority Class Base) – The PoE Dynamic
mode is automatic negotiation PD device by classification
level of power, and power budget management by port
PD priority. The default device power connection priority
is port1(high priority)>port2>…>port8(low priority).
Apply
Click it to enable PoE Mode and activate the PoE
Setting.
Check
to enable a port. The factory default for all
ports is disabled.
Edit
Check
for one entry and click Edit to modify the
setting.
Port
Display Port Name.
PD Priority
Display PD Priority.
The following shows the configuration page of PoE setting.