Operation Manual

VigorSwitch P1100 User’s Guide
48
3
3
.
.
4
4
.
.
2
2
.
.
3
3
L
L
A
A
C
C
P
P
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Function name:
Switching>>Link Aggregation>>LACP Setting
Function description:
It is a Trunk mechanism can aggregate several physical ports to a logical port for higher
bandwidth. The device provides at most 8 groups of trunk configuration. Each trunk group
can aggregate at most 8 ports. For trunk ports traffic balancing, a hash function is applied
and the hash parameters can be configured by user. There are 2 sets of hash algorithm
configurations, each trunk group can bind to a set of configuration. The device also provide
traffic separation mechanism to choose the link maximum id member port dedicated for
known multicast traffic or flooding traffic.
Parameter description:
LACP Setting
System Priority
Configure the system priority of LACP. This decides the
system priority field in LACP PDU.
Apply
Save the settings or changes to the switch.
Port
Port Name.
Port Priority
LACP priority value of the port.
Timeout
The periodic transmissions type of LACP PDUs.
Long: Transmit LACP PDU with slow periodic (30s).
Short: Transmit LACP PDU with fast periodic (1s).
Check
to enable a port. The factory default for all
ports is disabled. A port must be enabled for data
transmission to occur.
Edit
Check
for one entry and click Edit to modify the
setting.
The following shows the configuration page of LACP port setting. Port id could be
physical port id or logical port id (trunk id). Mirror, ingress and egress bandwidth control