Operation Manual

VigorSwitch P1100 User’s Guide
37
Address Type
Select the mode of network connection
 Static: Enable static IP address.
 Dynamic: Enable Dynamic to type IP address.
IP Address
Enter the IP address of your switch in dotted decimal
notation for example 192.168.1.224. If static mode is
enabled, enter IP address in this field.
Subnet Mask
Enter the IP subnet mask of your switch in dotted decimal
notation for example 255.255.255.0. If static mode is
enabled, enter subnet mask in this field.
Default Gateway
Enter the IP address of the gateway in dotted decimal
notation. If static mode is enabled, enter gateway address
in this field.
DNS Server 1
If static mode is enabled, enter primary DNS server
address in this field.
DNS Server 2
If static mode is enabled, enter secondary DNS server
address in this field.
IPv6 Address
Auto Configuration
Select Enable or Disable this function.
DHCPv6 Client
DHCPv6 client state.
 Enable: Enable DHCPv6 client function.
 Disable: Disable DHCPv6 client function.
IPv6 Address
Enter the IPv6 address of your switch. If auto
configuration mode is disabled, enter IPv6 address in this
field.
Prefix Length
Specify the prefix for the IPv6 address, when the IPv6
auto configuration and DHCPv6 client are disabled.
IPv6 Gateway
Enter the IP address of the gateway in dotted decimal
notation. If auto configuration mode is disabled, enter
IPv6gateway address in this field.
DNS Server 1
If static mode is enabled, enter primary DNS server
address in this field.
DNS Server 2
If static mode is enabled, enter secondary DNS server
address in this field.
Operational Status
IPv4 Address
Display the optional IPv4 address of the switch..
IPv4 Default Gateway
Display the optional IPv4 gateway of the switch.
IPv6 Address
Display the optional IPv6 address of the switch.
IPv6 Gateway
Display the optional IPv6 gateway of the switch.
Link Local Address
Display the optional IPv6 link local address for the
switch.
Apply
Save the settings or changes to the switch.