Operation Manual

VigorSwitch P1100 User’s Guide
113
Address Type
Choose IPv4/IPv6/Hostname to specify IP address or the
hostname of the SNMP trap recipients.
Server Address
Type the IP address of SNMP server based on the address
type selected above.
Server Address
Type the IP address of remote log server.
Server Port
Enter a number between 1 and 65535 as the server port.
Facility
Select facility of log messages which will be sent. It can
be one of the following values:
local0, local1, local2, local3, local4, local5, local6, and
local7.
Minimum Severity
Select severity of log messages which will be sent.
Emergence: System is not usable.
Alert: Immediate action is needed.
Critical: System is in the critical condition.
Error: System is in error condition.
Warning: System warning has occurred.
Notice: System is functioning properly, but a system
notice has occurred.
Informational: Device information.
Debug: Provides detailed information about an event.
Apply
Save the settings or changes to the switch.
Close
Close the page and return to previous page.
3
3
.
.
9
9
.
.
2
2
M
M
i
i
r
r
r
r
o
o
r
r
i
i
n
n
g
g
Function name:
Diagnostics >> Mirroring
Function description:
To display the Port Mirroring web page.
Parameter description:
Click it to select port profile.
Session ID
Display mirror session ID.
State
Select mirror session state: port-base mirror or disable.
Enabled: Enable port based mirror.