Operation Manual

VigorSwitch P1100 User’s Guide
110
Add
Click Add to add any other notification.
Delete
Click Delete to remove any selected community strings.
The following shows the setting page by clicking Add.
Parameter description:
Address Type
Choose IPv4/IPv6/Hostname to specify IP address or the
hostname of the SNMP trap recipients.
Server Address
Type the IP address of SNMP server based on the address
type selected above.
Version
Specify SNMP notification version.
SNMPv1: SNMP Version 1 notification.
SNMPv2: SNMP Version 2 notification.
Type
Specify Notification Type.
Trap: Send SNMP traps to the host.
Inform: Send SNMP informs to the host.
Community
Choose one of the community profiles (created by
Management>>SNMP>>Community).
Apply
Save the settings or changes to the switch.
Close
Close the page and return to previous page.