Operation Manual
VigorSwitch P1092 User’s Guide
3
1
1
.
.
4
4
L
L
E
E
D
D
I
I
n
n
d
d
i
i
c
c
a
a
t
t
o
o
r
r
s
s
a
a
n
n
d
d
C
C
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
s
s
Before you use the Vigor device, please get acquainted with the LED indicators and
connectors first.
There are 8 Ethernet ports on the front panel of the switch. LED display area, locating on
the front panel, contains an ACT, Power LED and 8 ports working status of the switch.
L
L
E
E
D
D
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
LED Color Explanation
On (Green) Connected over the PoE maximum power budget.
PoE/Alert
Off Connected within the PoE maximum power
budget.
On (Green) The switch is powered on and runs normally.
PWR/SYS
Off The switch is not ready or is failed.
On (Green) The port is supplied with PoE power.
PoE for Ports
1~8
Off No PoE power is supplied on the port.
On (Green) The device is connected with 1000Mbps.
On (Amber)
The device is connected with 10/100Mbps.
Blinking
The system is sending or receiving data through the
port.
RJ 45
LNK/ACT for
Ports 1 ~ 8
Off The port is disconnected or the link is failed.
On (Green) The device is connected with 1000Mbps.
On (Amber) The device is connected with 10/100Mbps.
Blinking The system is sending or receiving data through the
port.
SFP
LNK/ACT for
Port 9 ~ 10
Off
The port is disconnected or the link is failed.
C
C
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
Interface Description
RJ 45 LNK/ACT Port 1 ~ 8
PoE for Port 1 ~ 8
Port 1 to Port 8 can be used for Ethernet connection
and PoE connection, depending on the device
connected
.
SFP Port 9 ~ 10
Used for fiber connection.
Power inlet for AC input (100~240V/AC,
50/60Hz).
Power Output -- IEEE 802.3af Max. 15.4W Output Supported;
IEEE 802.3at Max. 30W Output Supported
PoE Power Budget -- 110 Watts (Max)