Operation Manual

VigorSwitch G2280 User’s Guide
8
4
full-duplex and “does not” directly connect to another switch
or host.
BPDU Filter Yes – Drop all BPDU packets and no BPDU will be sent.
BPDU Guard Yes – BPDU Guard further protects your switch by turning this
port into error state and shutdown if any BPDU received from
this port. Check it to enable such function.
Apply Apply the settings to the switch.
After clicking it, the settings configured above will be shown
on the table below.
Ports Use the drop down to specify the interface(s) for applying the
function of Migrate.
Migrate Click it to force the port(s) specified above to send one RSTP
BPDU (Rapid Spanning Tree Protocol Bridge Protocol Data
Unit).
Admin Enable YES – Such port is managed by VigorSwitch.
Edit Click it to modify the settings for the selected GE port.