Operation Manual

VigorSwitch G2280 User’s Guide
78
I
I
I
I
-
-
7
7
-
-
4
4
-
-
7
7
F
F
i
i
l
l
t
t
e
e
r
r
i
i
n
n
g
g
P
P
r
r
o
o
f
f
i
i
l
l
e
e
The administrator can configure the user on a switch port (GE/LAG port) belonging to which
multicast group and restrict the number of multicast group that the user on the switch can
join. Then the administrator is able to control the network service (e.g, IP/TV service) that
the user can enjoy.
The filtering profile page allows to configure up to 128 IP-group (for multicast servie) profiles
(starting and ending point within an IP range shall be specified). Each IP group profile can be
set for permission of / denial of network service respectively.
In addition, such filtering profile is only effective for controlling the query for multicast
traffic. It has nothing to do with the general MLD query.
Available settings are explained as follows:
Item Description
Profile ID Use the drop down list to select one filtering profile (1~128)
for MLD snooping.
Start Address Enter an IP address as the starting point for the IP range.
End Address Enter an IP address as the ending point for the IP range.
Action Deny – It is default setting. The forwarding request of
multicast traffic will be discarded.
Allow – When it is selected, the request for multicast traffic
will be forwarded to the multicast group normally.
Add Click it to display the result based on the settings configured
above.
Edit
- Click it to modify the settings for the selected entry.