Operation Manual

VigorSwitch G2280 User’s Guide

Disabled – Click it to disable the MLD snooping function.

Version VigorSwitch supports two versions of MLD snooping.

MLDv1 – When it is selected, VigorSwitch will detect packets

controlled by MLDv1 and bridge the traffic to IPv6 destination

defined with multicast address(es).

MLDv2 - When it is selected, VigorSwitch will detect packets

controlled by MLDv1 and forward the traffic to destination

defined with multicast address(es).

Report Suppression Enabled – Click it to allow the switch to handle MLD reports

between router and host, suppressing bandwidth used by MLD.

Disabled – Click it to disable the function.

Apply Click it to display the result based on the settings configured

above.

Edit

- Click it to modify the settings for the selected VLAN ID

(GE/LAG port).

MLD Snooping State – Enable/disable the MLD snooping

function for the selected port.

Router Ports Auto Learn –Set the enabling status of IGMP

router port learning. Choose Enable to learn router port by

MLD query.