Operation Manual

VigorSwitch G2280 User’s Guide
31
I
I
I
I
-
-
3
3
M
M
i
i
r
r
r
r
o
o
r
r
This section provides ability to mirror packets coming in or going out on any port to a
destination port. Through the packet duplication in the destination port, this feature is
convinent for system administrator to monitor / understand the traffic operation.
Session ID 1 to 4 can be enabled simultaneously and operate independently.
Available settings are explained as follows:
Item Description
Session ID Select the session ID (profile 1 to 4) of mirror operation you
wish to configure.
Monitor Session State Enable – Enable specified mirror session.
Disable - Disable specified mirror session.
Destination Port Specify the port where you wish to observe the mirrored
packets.
Allow Operation as
Normal Port
Enable – The destination port is able to function as a port
connecting to network, communicating with other network
devices.
Disable - Only observe the mirrored packets.
Sniff Ports (RX) / (TX) Select the port(s) which you wish to mirror the traffic, Rx for
mirror the packets into the port, Tx for mirror the packets
going out from the port.
Apply Apply the settings to the switch.