Operation Manual
VigorSwitch G2280 User’s Guide
2
7
enter subnet mask in this field.
Gateway It is available when Static is selected as Mode.
Enter the IP address of the gateway in dotted decimal
notation. If static mode is enabled, enter gateway address in
this field.
DNS Server 1 It is available when Static is selected as Mode.
If static mode is enabled, enter primary DNS server address in
this field.
DNS Server 2 It is available when Static is selected as Mode.
If static mode is enabled, enter secondary DNS server address
in this field.
Apply Apply the settings to the switch.
I
I
I
I
-
-
1
1
-
-
2
2
I
I
P
P
v
v
6
6
A
A
d
d
d
d
r
r
e
e
s
s
s
s
Use the IPv6 Address screen to configure the switch IPv6 address and the default gateway
device. The gateway field specifies the IPv6 address of the gateway (next hop) for outgoing
traffic.
Available settings are explained as follows:
Item Description
Auto Configuration Enable - Check it to let switch automatically configure IPv6
address.
IPv6 Address It is available when Auto Configuration is set as Disable.
Enter the IPv6 address of your switch. If auto configuration
mode is disabled, enter IPv6 address in this field.
Link Local Address Display link local address.
Gateway It is available when Auto Configuration is set as Disable.
Enter the IPv6 address of the router as your default IPv6
gateway to access IPv6 Internet or other IPv6 network.
DNS Server 1 It is available when Auto Configuration is set as Disable.