Operation Manual
VigorSwitch G2280 User’s Guide
154
V
V
I
I
-
-
1
1
T
T
R
R
-
-
0
0
6
6
9
9
This page allows a user setting TR-069 parameters that VigorSwitch can be managed by
VigorACS.
Item Description
ACS Settings TR-069 –Click Enable to activate the settings on this page.
URL / Username / Password –Such data must be typed
according to the ACS (Auto Configuration Server) you want to
link. Please refer to Auto Configuration Server user’s manual
for detailed information.
Last Inform –Display the time that VigorACS server made a
response while receiving Inform message from CPE last time.
Test Inform – Click Test With Inform to send a message based
on the event code selection to test if such CPE is able to
communicate with VigorACS SI server.
CPE Settings Such information is useful for Auto Configuration Server.
Enable/Disable – Allow/Deny the CPE Client connecting with
Auto Configuration Server.
Port – Sometimes, port conflict might be occurred. To solve
such problem, you might change port number for CPE.
Username and Password – Enter the username and password
that VigorACS can use to access into such CPE.
Periodic Inform Settings Periodic Inform Settings –The default setting is Enable.
Please set interval time or schedule time for the router to
send notification to CPE.
Interval Time – Enter a value.
STUN Settings STUN Settings – The default is Disable. If you click Enable,
please type the relational settings listed below:
Server IP – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of