Operation Manual

VigorSwitch G2280 User’s Guide
144
V
V
-
-
1
1
-
-
2
2
P
P
o
o
r
r
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
This page allows the network administrator to configure port settings for QoS. The
configuration result for each port will be displayed on the table listed on the lower side of this
web page.
Available settings are explained as follows:
Item Description
Ports Use the drop down list to select the port profile (GE1 to GE28)
or profiles.
Ingress Default CoS Specify the default CoS priority value for those ingress frames
without given trust QoS tag (802.1q/DSCP/IP Precedence,
depending on configuration).
Engress Remarking
Remark CoS Disable – Disable CoS remarking function for outgoing packets.
Enable - Egress traffic will be marked with CoS value
according to the Queue to CoS mapping table.
Remark DSCP/IP
Precedence
Disable – Disable DSCP/IP Precedence remarking function for
outgoing packets.
DSCP – Egress traffic will be marked with DSCP value according
to the Queue to DSCP mapping table.
IP Precedence - Egress traffic will be marked with IP
Precedence value according to the Queue to IP Precedence
mapping table.
Apply Apply the settings to the switch.
Modify
- Click it to modify the settings for the selected port
profile.