Operation Manual

VigorSwitch G2280 User’s Guide

DSCP – All IP traffic is mapped to queues based on the DSCP

field in the IP header. If traffic is not IP traffic, it is mapped to

the lowest priority queue.

IP Precedence - All IP traffic is mapped to queues based on

the IP Precedence field in the IP header. If traffic is not IP

traffic, it is mapped to the lowest priority queue.

Source Port / Destination

Port

Specify the source and destination port number for filtering

the packets.

Any – All packets will be filtered.

Single – Only the packets passing through the number defined

here will be filtered.

Range – Only the packets passing through the port range

defined here will be filtered.

ICMP Type Any – All packets will be filtered.

Select – Choose one of the type (e.g., Destination Unreachable

Echo Reply, MLD Query….) from the drop down list.

Define – Specify a type number (0 – 255) for ICMP code. For

example, 0 means “Echo Reply”; 254 means “RFC3692-style

Experiment 2”.

ICMP code Each ICMP type can be defined with different codes. For

example, if you define ICMP Type as “3”, then the available

codes for Type 3 will be 0-15.

Any – All packets will be filtered.

Or, enter 0 to 255 based on the ICMP type specifed.

Add Click it to create a new binding profile.

Modify

- Click it to modify the settings for the selected profile.

- Click it to remove the selected entry.