Operation Manual

VigorSwitch G2280 User’s Guide
110
I
I
I
I
I
I
-
-
6
6
P
P
o
o
r
r
t
t
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
This page allows the network administrator to configure security settings for each port
interface (GE port /LAG group). When port security is enabled for each interface, releated
action will be performed once detecting that the number of MAC address exceeds the limit.
Available settings are explained as follows:
Item Description
State Enable or disable port security function on the switch.
Enabled - Enable the port security function.
Disabled - Disable the port security function.
Ports Select the port(s) you would like to configure the port security
settings.
Port State Enable or disable port security function on the ports selected
above.
Enabled – The selected port applies the port security settings.
Disabled – The selected port does not apply the port security
settings.
MAC Address Enter the maximum number of MAC addresses that the port is
allowed to learn.
Action Select an action to perform when there is an unknown MAC
address on the port.
Forward- Forward a packet whose source MAC is unknown to
the switch.
Discard- Discard a packet whose source MAC is unknown to the
switch.
Shutdown- Shutdown this port when a packet with unknown
source MAC is received.
Apply The modification made above can be applied on to the
selected GE/LAG port immediately.
Edit
- click it to modify the settings for the selected entry.