Operation Manual

VigorSwitch G2280 User’s Guide
98
I
I
I
I
I
I
-
-
2
2
T
T
A
A
C
C
A
A
C
C
S
S
+
+
This page allows the network administrator to add and configure multiple TACACS+ server.
Available settings are explained as follows:
Item Description
Use Default Parameters Timeout –Set the time (in seconds) before this server being
considered lost connection.
Key String – Enter the string used to encrypt and authenticate
with TACACS+ server.
Apply - Save the settings.
Add TACACS+ Server Address Type – Specify whether switch use a hostname to
resolve address by DNS to connect to server, or directly
connect using IPv4 address.
Sever Address – Enter the server’s address corresponding with
address type given.
Server Port – Enter the port number used by TACACS+ server.
Priorty - Specify the priority that switch uses this server. The
higher number, the lower priority. Switch will start with server
with lowest priority.
Timeout –Set the time (in seconds) before this server being
considered lost connection.
Key String – Enter the key string used for encrypting and
authenticating with server. Unless Key String is specified here,
the default string will be used.
Add – Click it to add a new RADIUS server and display in this
page.
under Edit- Click it to modify the priority setting for the
selected GE port / LAG port.