Operation Manual
Table Of Contents
- Table of Contents
- Part I Introduction
- Part II Switch LAN
- Part III Security
- Part IV QoS Configuration
- Part V System Maintenance
- Part VI Diagnostics
- Appendix: Reference
- Index
VigorSwitch G1280 User’s Guide
93
V
V
I
I
-
-
2
2
P
P
i
i
n
n
g
g
T
T
e
e
s
s
t
t
After finished the ping test, the results will be shown on the lower side of this web page.
Available settings are explained as follows:
Item Description
Protocol Choose IPv4/IPv6 to specify IP address for sending ping to
check if network path is ok.
Host Enter the IP address of SNMP server based on the protocol
selected above.
Count
It means how many times to send ping request packet.
Enter a number between 1 and 5 as the count and the default
configuration is 4.
Interval(sec) Define the interval to perform ping action. For example, “1”
means the ping action will be performed per second.
Start Perform ping action.
Stop Terminate ping action.