Operation Manual
Table Of Contents
- Table of Contents
- Part I Introduction
- Part II Switch LAN
- Part III Security
- Part IV QoS Configuration
- Part V System Maintenance
- Part VI Diagnostics
- Appendix: Reference
- Index
VigorSwitch G1280 User’s Guide
87
V
V
-
-
6
6
U
U
p
p
g
g
r
r
a
a
d
d
e
e
M
M
a
a
n
n
a
a
g
g
e
e
r
r
Backup Manager allows a user to upgrade the firmware image or configuration file on the
switch to remote TFTP server or host file system through HTTP protocol.
Available settings are explained as follows:
Item Description
Upgrade Method Select Upgrade method:
TFTP - Using TFTP to upgrade firmware.
HTTP - Using WEB browser to upgrade firmware.
Server IP It is available when TFTP is selected as Upgrade Method.
Enter the IPv4/IPv6 address for the TFTP server.
File Name It is available when TFTP is selected as Upgrade Method.
Enter the firmware image or configuration file name on the
TFTP server.
File/Path It is available when HTTP is selected as Upgrade Method.
Choose the firmware file located in your computer.
Upgrade Type It is available when TFTP is selected as Upgrade Method.
Image – Click it to upgrade the firmware image.
Configuration – Click ito to upgrade the configurations for
VigorSwitch.
Apply Save the settings or changes to the switch.