Operation Manual
Table Of Contents
- Table of Contents
- Part I Introduction
- Part II Switch LAN
- Part III Security
- Part IV QoS Configuration
- Part V System Maintenance
- Part VI Diagnostics
- Appendix: Reference
- Index
VigorSwitch G1280 User’s Guide
75
V
V
-
-
1
1
-
-
2
2
L
L
L
L
D
D
P
P
P
P
o
o
r
r
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This page allows a user to select specified port or all ports to configure LLDP state.
Available settings are explained as follows:
Item Description
Ports Use the drop down list to select the port (GE1 to GE28) or
ports for device check.
State Disable – Disable the transmission of LLDP PDUs.
TX&RX – Transmit and receive LLDP PDUs both.
TX Only – Transmit LLDP PDUs only.
RX Only - Receive LLDP PDUs only.
Optional TLVs
Within data communication protocols, optional information
may be encoded as a type-length-value or TLV element inside
a protocol. TLV is also known as tag-length value.
The type and length are fixed in size (typically 1-4 bytes),
and the value field is of variable size.
Select the LLDP optional TLVs to be carried (multiple selection
is allowed).
Available items include System Name, Port Description,
System Description, System Capability, 802.3 MAC-PHY, 802.3
Link Aggregation, 802.3 Maximum Frame Size, Management
Address and 802.1 PVID.
VLAN Select the VLAN ID number to be performed (multiple
selections are allowed).
Apply Save the settings or changes to the switch.
Modify Click it to modify the settings for the selected GE port.