Operation Manual

VigorSwitch G1280 User’s Guide
4
9
Max Age Specify the time interval in seconds for a switch to wait the
configuration messages, without attempting to redefine its
own configuration.
Tx Hold Count Specify the tx-hold-count used to limit the maximum numbers
of packets transmission per second. The valid range is from 1
to 10.
Hello Time Specify the STP hello time in second to broadcast its hello
message to other bridge by Designated Ports. Its valid range is
from 1 to 10 seconds.
Apply Save the settings or changes to the switch.
I
I
I
I
-
-
9
9
-
-
4
4
P
P
o
o
r
r
t
t
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This page allows user to edit general setting of STP CIST port and browser CIST port status.
Available settings are explained as follows:
Item Description
Port Display the interface number for GE and LAG.
Indentifier(Priority/ID) Display the spanning tree port identifier.
Path Cost Conf/Oper Display current path cost of given port.
Designated Root Bridge Display the identifier of designated root bridge.
Root Path Cost Display the operational root path cost.
Designated Bridge Display the identifier of next bridge on this port.
Edge Port Conf/Oper Display if this port is configured as Edge of STP network, for
speed up link up.
P2P Option Conf/Oper Display if this port is configured as point to point link to
another switch or host.
Port Role Display current port role on the specified port. The possible
values will be: “Disabled”, “Root”, “Designated”,