Operation Manual

VigorSwitch G1280 User’s Guide
48
Apply Save the settings or changes to the switch.
After clicking it, the settings configured above will be shown
on the table below.
Admin Enable Enable – Such port is managed by VigorSwitch.
Edit Click it to modify the settings for the selected GE port.
I
I
I
I
-
-
9
9
-
-
3
3
B
B
r
r
i
i
d
d
g
g
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This page allows you to configure required information to negotiate with other VigorSwitch
for determining the bridge switch.
Available settings are explained as follows:
Item Description
Priority Specify the bridge priority. The valid range is from 0 to 61440,
and the value should be the multiple of 4096. It ensures the
probability that the switch is selected as the root bridge, and
the lower value has the higher priority for the switch to be
selected as the root bridge of the topology.
Forward Delay Specify the STP forward delay time, which is the amount of
time that a port remains in the Listening and Learning states
before it enters the Forwarding state. Its valid range is from 4
to 10 seconds.