Operation Manual

VigorSwitch G1260 User’s Guide
63
QoS Mode - Disabled
QoS Mode – 802.1p
Each Priority can select any of Queue. In Default, Priority 0 is mapping to Queue normal,
Priority 1 is mapping to Queue low, Priority 2 is mapping to Queue low, Priority 3 is
mapping to Queue normal, Priority 4 is mapping to Queue medium, Priority 5 is mapping
to Queue medium, Priority 6 is mapping to Queue high, and Priority 0 is mapping to Queue
high.
Parameter description:
Prioritise Traffic
Five Prioritize Traffic values are provided: User Defined,
All Low Priority, All Normal Priority, All Medium
Priority, and All High Priority.
The QoS setting would apply to all ports on the switch if
one of the following values is selected: All Low Priority,
All Normal Priority, All Medium Priority, or All High